How to Decorate Your Room with Paper

How to Decorate Your Room with Paper
Decorating your room can be a lot of fun. While you can always buy premade decorations, you can make ones that are just as nice, but much cheaper at home. From creating wall décor to decoupaging your dresser, there are all sorts of interesting ways that you can use paper. Cardstock and scrapbooking paper will work for most projects, but don't forget other types too, such as tissue paper, cupcake liners, and wrapping paper.

Method 1 Creating Wall Décor
1. Tape scrapbook paper together to create a quilted wall hanging. You could hang this over a large window or behind a bed. Gather 16 squares of scrapbooking paper. Overlap the papers by 1⁄2 inch (1.3 cm) to make a large square. Secure the edges of the papers with double-sided tape. Glue the quilt to a wooden slat, then hang it from your wall.
Choose 2 to 4 different patterns or colors for the paper.
For a more realistic quilt, skip the tape and sew down the seams on your sewing machine with a straight stitch.
Use saw-tooth hangers or ribbon to hang the slat.
2. Create your own wall decals from paper. This is great seasonal project as you could create leaves for fall, snowflakes for winter, flowers for the spring, and suns for the summer. Use stencils or large cookie cutters to trace shapes onto colored paper. Cut these shapes out, then secure them to your wall with double-sided tape or poster putty.
Your paper can be solid-colored or patterned. You can even use magazine pages!
Simple shapes, such as hearts and stars work well, but you can use more complex ones too. Try snowflakes, reindeer, or bats!
Match the color of the paper to the shape. For example, make stars yellow or blue, and hearts red or pink.
You can put up just a few decals or create a wall mural with them.
3. Make a sunburst wall hanging by gluing paper tubes together. Gather paper in 2 to 3 different sizes. Roll the paper into tubes, then tape tubes shut. Arrange the tubes side-by-side to create a flat disk or sunburst, then hot glue them together. Hang the sunburst from your wall with thread.
The long edges of the tubes should be touching. How much space you leave in the middle is up to you.
Make a smaller sunburst, then glue it on top of a larger sunburst for a layered design.
For a dramatic effect, create several small sunbursts and hang them on a single wall.Image titled Decorate Your Room with Paper Step 4
4. Fold paper butterflies in half, then secure them to your wall. Use a stencil or a cookie cutter to trace butterfly shapes onto colored paper. Cut the butterflies out, then fold them in half along the body to create a crease. Secure the butterflies to your wall with poster putty or double-sided mounting tape.
Rather than folding the butterflies down the center of the body, fold the wings to either side of the body. This will give you more paper to stick to the wall.
Make lots of butterflies in different colors and sizes, then stick them to your wall in a cluster.
For a whimsical vibe, use glitter paint to decorate the butterflies or attaching trailing ribbons to them.
5. Make some tufted tissue paper wall art. Cut a large shape out of tissue paper. Next, cut tissue paper into 1 to 2 in (2.5 to 5.1 cm) squares. Wrap each tissue paper square over the end of an unused pencil eraser, dip it in glue, then press it against your shape. Keep going until you have the entire shape filled with tufted bits of tissue paper, then hang it up with poster putty or push pins.
Keep the shape simple, such as a heart, star, or letter.
You can use more than 1 color of tissue paper. Try 3 shades of the same color for an ombre design.
Work in rows from 1 side of the shape to the other. Make sure that the tissue paper tufts are touching.

Method 2 Making Garlands.
1. Glue folded butterflies to string to create a 3D garland. This would be a great decoration for a child’s bedroom. Cut butterfly shapes out of paper, then fold them in half to create creases. Hot glue half of the butterflies along the creases to a long piece of string. Flip the garland over, then hot glue the rest of the butterflies to the backs of the first ones so that the wings fold away from each other.
Make sure that you are gluing the folded edges of the butterflies together. This will create a 3D effect.
Make sure that the butterflies are all the same shape. Use a stencil or a craft punch to make them. They should be 2 to 3 inches (5.1 to 7.6 cm) across.
For a unique look, use paper in various colors.
2. Sew a garland using simple shapes. Use a large craft punch to cut lots of shapes from colored paper. Stack 2 shapes together, then sew down the middle on your sewing machine with a straight stitch. Stack 2 more shapes, and sew across them as well. Keep going until your garland is the length you want it.
Keep the shapes simple, such as circles or squares.
For a 3D effect, fold each of the shapes in half, so that the papers are pointing away from each other. Do 1 side of the garland first, then the other.
Backstitch when you start and finish sewing so that the stitching doesn't come undone.
3. Glue paper triangles to string to make a pennant banner. Cut a large triangle from colored or patterned paper. Turn the triangle so that you can see the back, then cover the bottom straight edge with double-sided tape. Drape your string across it, then fold the edge down by 1⁄2 inch (1.3 cm). Trim off the excess corners sticking out from behind the folded edge.
Repeat this step to fill your string up with as many triangles as you want.
The size of the triangles does not matter, but they should all be the same.
Hang the garland above your bed, dresser, or window.
If you want to create a banner for the holidays, cut the triangles out of decorative wrapping paper.
4. Hang mini garlands from a piece of string to use as a curtain. Measure the height of your window, then create 5 to 7 mini garlands based on that measurement. Next, hang a piece of string across the top of your window. Tie each mini garland to that string to create a curtain-like effect.
This will only work with the butterfly and circle style garlands mentioned above. It won't work with a pennant style garland.
5. Add cupcake liners to string lights to mimic flowers. Fold a green cupcake liner into fourths. Cut a leaf shape into it, keeping it connected at the pointed end, then unfold it to reveal a 4-leaf flower. Next, fold a colored cupcake liner into thirds. Cut an arch into the curved edge, then unfold it to reveal an 8-petal flower. Put the flower on top of the leaves, poke a hole in the center of the stack, then push it onto a bulb of string lights. Repeat this step for each of the lights on your string.
To fold into thirds: fold the cupcake liner into fourths first, then fold it over 1 more time.
You can use string lights with a white cable or green cable. LED lights would work the best. Don't leave the lights on unattended.

Method 3 Decorating Furniture.
1. Decoupage a desk or dresser. Coat the top of your desk or dresser with decoupage glue. Place a sheet of wrapping paper over it, smooth out any wrinkles, then trim off the excess. Let the glue dry, then seal it with 2 coats of decoupage glue.
Let each layer of decoupage glue dry before you add the next coat.
Feel free to stick with 1 kind of paper or layer different papers for an eclectic look.
2. Glue paper semicircles in overlapping layers to a lampshade. Choose paper in a light, dark, and medium shade of the same color. Cut enough semicircles from the paper to cover your lampshade. Hot glue the circles in overlapping rows to create a scale effect. Make sure that the light bulb does not get hot enough to start the paper on fire!
Start from the bottom of the lamp and work your way up. Make sure that the curved edges of the scales are pointing down.
Mix-and-match the shades in the same row, or use 1 shade per row to create an ombre effect.
The size of the scales does not really matter, but 2 to 3 inches (5.1 to 7.6 cm) would be good.
3. Make paper roses, then glue them to the bottom edge of a lampshade. Cut a large circle out of paper, then cut the circle into a spiral. Starting from the outside, roll the spiral into a coil. Loosen the coil slightly, then hot glue the end to maintain the rose shape. Create enough of these to hot glue to the bottom edge of your lampshade.
Match the color of the roses to your lampshade, or use a contrasting color.
Don't combine this with the scales. Choose 1 or the other.
4. Line the inside of your shelves with patterned paper. Take everything out of your drawer, then measure the inside. Cut patterned paper to those dimensions, then tuck it into the drawer. Put everything back into the drawer, then close it. This is also a great option for the back of a bookshelf.
Decoupage over the paper to make it permanent.
Use double-sided tape to secure the corners of the paper, if desired.
Use wrapping paper for large drawers, and scrapbooking paper for small drawers.
5. Overlap and glue large doilies together to make a table runner. Find some large doilies measuring 12 to 24 inches (30 to 61 cm) across. Paint them with watercolors, if desired, then let them dry. Overlap them end-to-end by 4 to 6 inches (10 to 15 cm) inches, then glue them down. Keep going until you get the length you want, then set it on top of your dresser.
Make the table runner wider by gluing more doilies to the sides.
You can find paper doilies in the baking section of a craft store.

Tips.
Your garlands can be however long you want them to be. Be sure to tie loops in the ends so that you can hang them up.
Cookie cutters make great stencils. You can also use large, shaped craft hole punches instead.
Things You'll Need.
Colored cardstock.
Patterned scrapbooking paper.
Tissue paper.
Cupcake liners.
Poster putty or foam mounting tape.
Glue.
String.
Scissors

5:14 AM

How to Build a Tiny House.

How to Build a Tiny House.

Many people have one very big loan, and that is a home mortgage. A mortgage can end up costing much more than your house is worth and takes much of your lifetime to pay off. One creative way to sidestep this problem is to make the choice to live in a tiny house. It is also a great way to live a minimalist life, avoiding being tied down by too much stuff. This article will start you off with some basic steps to cover when seeking to build a tiny house.



Part 1 Planning Your Build.

1. Figure out what kind of lifestyle you want to live. Your needs for mobility, stability and space will determine the type of tiny house you will be seeking to develop. Consider the following:

If you intend to move a lot, then a trailer-based home is probably a good choice.

If you think you'll maybe move once or twice, then you can use a bigger trailer base for your house a rent a truck to move it for you when the time comes.

Build onto the tiny house. You also have the option of building extensions to the main house, such as a deck or rooftop patio.

If you have a spot to build on, then you can do normal construction on a spot of land (this tends to be more expensive and permanent).

2. Determine what needs your home must meet. Sit down and make a list of all the things you want in your home. Of course, this is a tiny house, so you need to focus on the necessities, as there isn't any room for a lot of stuff. Examples of important basics for the house include:

One or more beds.

Appliances such as the oven, fridge, stovetop, microwave, etc., remembering that all of these will likely be much smaller than those you'd have in a standard size house.

Washer-dryer combo instead of two different machines.

3. Find a location to either park the trailer base or to build your tiny house in situ. Choose a location with accessibility to water and electricity. If this is not possible find a way to come up with alternatives. For example, many people prefer to use solar power and collect rain as part of the tiny house philosophy.



Part 2 Creating a First Draft of the House.

1. Map out all the things you want in your house. As you do so, keep in mind the exact amount of space you have to work with. It will always be less than you expect, so don't be surprised if you have to let go of some dream ideas but see this as an opportunity to be inventive rather than giving up on everything.

Include plenty of storage space and clever ideas such as stairs that include storage underneath.

This step works best by making an electronic floor plan of the house, or you can also make a actual model by hand so that you get a good sense of how it will look in your hands.

2. Scale the design so that the dimensions of your model will be accurate when building the house. A key aspect of this step is to build the house around the appliances you want. Go online and find the appliances that you will buy and go to the specs of the product. There will be dimensions for you to include in your floor plan/model.



Part 3 Making a Budget.

1. Work out the budget by concentrating on the main elements involved. These are appliances, labour, building materials and tools. Usually to build the house with all the desirable (kitchen, trailer, siding, etc.), an average cost is about $35,000 for a 24 ft trailer house. Keep in mind that the smaller the trailer, the cheaper the build. And, if you want fancier things and bigger size, the tiny house can cost up to $100,000.

2. Work out the appliance budget. With the appliances that you have selected in your floor plans as a base, include how much you can spend immediately. Then work out how much you can spend over time (that is, how much you can deduct from your paycheck towards the build).

3. Determine what you can do yourself. Then include the amount of labour that you can put in for things you can do yourself.

4. Figure out the cost of labour for professionals (i.e. plumber, electrician, builders).

5. Cost the tools you will need for your build. Renting the tools when necessary is one way to go so you don't have to put too much money into tools that you will not use again. For some basic tools it might be a better idea to just buy and own them if you don't already have them.This list provides a rundown of the tools you'll likely need.

Air compressor – Drives air powered tools like framing nailers and paint sprayers.

Caulking gun – Used to apply caulking and building adhesive.

Chalk line – Helps mark strait lines so that paneling, siding, and roofing stay in line.

Chisel – Used to finish cutting notches in wood.

Circular Saw – Handheld saw for cutting wood. Very versatile.

Clamps – Very useful when you need a second set of hands and none are available.

Crowbar – Good for amplifying elbow grease, and pulling nails.

Drill – Used for drilling holes and driving screws.

Dust Masks – Essential for protecting your lungs during dusty work.

Eye Protection – Essential for protecting your eyes during most cutting and other debris flinging work.

Framing nailer – Makes driving nails much easier.

Gloves – Essential for protecting your hands from splinters and abrasions.

Hacksaw – Used for cutting metal like pipes, nails, etc.

Hammer – Used for persuading lots of things on the job site, most commonly nails.

Impact driver – Like a drill, but drives screws better when the job is tough.

Level – Used to keep everything strait and level.

Miter saw – Used as a chop saw when many identical angered or strait cuts are needed.

Pliers – Used for pulling nails and most anything when your fingers aren’t tough enough.

Reciprocating Saw – Commonly used for demolition but also very handy for cutting nails and rough cuts on wood.

Rubber mallet – Ideal wen gentile persuasion is needed.

Socket wrench – Good for turning nuts in tight places, like when bolting your tiny house floor framing to the trailer.

Screwdrivers – Needed for turning screws and useful for opening paint cans.

Staple gun – Good for hanging vapor barriers, roofing felt, and can be used on house wrap.

Table saw – Ideal for making long strait cuts.

Tape measure – Used constantly for keeping everything accurate.

Tin snips – Used for cutting thin metal, like the aluminum flashing you’d use between your floor and trailer.

Toolbox – Helpful for keeping everything organized and transportable.

Utility knife – Used to cut thin material like roofing felt, house wrap, and vapor barrier.

Wire cutter – Used when wiring your tiny house.

Wrench – Necessary for turning nuts on bolts, like when connecting your tiny house to the trailer.

6. Put together a materials list. A typical list of materials that you will need in your tiny house. The amount of each that you will need depends on your build, and the cost will therefore reflect what type of tiny house you're building. Here are standard materials needed:

Trailer (varies in the size and length, wood for floors, walls, ceiling, and interior structures.

Installation for the walls, floor and ceiling (recommend Roxul - fire and water resistant).

Class D tires for the trailer, Typical house siding, Typical shingles for roof, Drywall.

Doors and windows, Cabinets and storage closets (many can be built from reclaimed wood if feasible).

Toilet (composting, RV toilet, or a actual functioning toilet).

Shower (typically small standing shower is used, a small tub can be added with creativity).

Sinks (kitchen, and bathroom), Counter-tops, Plenty of screws, braces, and nails.

Pipes for plumbing and propane lines for heating and water lines.

Electrical circuit wiring, outlets, switches, and breakers.

Tyvek wrapping for protection (or similar suited to your area).

Heating system, Regular appliances as selected by you.

Metal sheeting for flashing the trailer base (galvanized for durability).

7. Include solar power elements, as needed. If solar panels are going to be added, then you'll need the following as well: A charge controller, deep cycle batteries, and inverter to store charge and convert from DC to AC power.



Part 4 Constructing Your Tiny House.

Build the foundation of your tiny house

1. Level the trailer using jacks for the trailer. This step is important to do properly or your house will be tilted.

2. Build a frame on the trailer that your house will be built. Anchor the frame to the trailer so that your house does not slide off the trailer during transport keep in mind the weight distribution so that your house does not tip over.

3. Add galvanized sheet metal to flash the bottom of the trailer. This helps protect the home from rodents, water, and other elements from the bottom.

4. Put a floor frame on top. Add the insulation (Roxul) for more protection.

5. Install the sub floor on top.

Wall Framing

1. Build the walls as you had designed in your floor plans. Leave room for the windows and doors, as well as putting in the studs, and weight barring headers.

The headers are one of the aspects that are against building code, but are necessary for a tiny house, as every wall is a weight bearing wall.

You must ensure that everything is perfectly squared.

2. Double check that the windows and door fit in the spaces you made for them. Do this before you put the walls up.

At this point you might want to move anything inside the house that will not fit through the door depending on the design.

3. Sheath the walls while they are still down. Then raise the walls (with help, for safety reasons). Make sure that the walls are perfectly squared with the floor and other walls.

4. Secure the walls to the trailer with anchors.

Adding the Roof

1. Make sure that walls are perfectly parallel with each other before installing the rafters. Apply a spring brace to secure the walls and make them perfectly straight while installing the rafter

Double check the distance between the walls at the top for a good cut.

2. Construct the trusses per the plans that you made. Ensure that the height is under 13.5 ft to stay street legal (this may vary between countries, so check with the road authorities first).

3. Begin the sheathing process. Cut out the boards and glue the truss edges. Use clips to secure the sheets of wood into place and secure with nail/screws

4. Apply the Tyvek covering for more protection on the sheathing boards.

5. Install the reflection barrier followed by the furring strips and shingles.

Adding the Windows, Doors, and Siding

1. Make sure that door and window holes were cut in the walls that were put up.

2. Put Tyvek wrap outside the house for protection

3. Tuck the Tyvek wrapping into the window cut outs. Begin applying flash tape to the window sills to prevent water and heat from entering.

4. Install the windows and secure with a couple screws along the side. Then test the functionality.

5. Apply flashing tape to the outside of the window to insure it is sealed. Leave the bottom unsealed for water drainage, just in case.

For the doors, do the same thing as windows and flash the doorway then start installing the door frame.

6. Install the door. This can be made or purchased.

7. Install locks and door knobs.

8. Begin the siding process by taping the Tyvek seams and installing the furring strips. Paint both sides of the siding before putting up, to prevent rusting.

9. Hang the siding with a nail gun or as the product describes.

10. End the work on the outside by installing fascia boards and a drip edge.

Part 5 Creating the Interior of the Tiny House

1. Install a lofted platform at an optimal height for the sleeping area. This is a common practice in a tiny house. It will also need a ladder or staircase to reach the loft area.

2. Get electrical and plumbing installed by a professional at this point. Do not do this yourself unless you are a professional in these fields.

Make sure you instruct the professional on where you want your outlets, lights and sockets for your tiny house to accommodate the floor plan, such as gas lines for the propane to the stove/oven or water lines to the water heater and shower.

Put in the smoke and CO alarms at the same time.

Consider the power usage or your appliances and adjust accordingly.

3. Begin insulating the home from the inside. Make sure to put foam in the edges so that it is completely sealed.

Make sure that all materials are not affected by the foam, as some do react and that is not a good outcome.

4. Install the major fixtures now. This includes the heater, shower, toilet, sink, and water heater (preferably tankless). The heater weight should be considered in conjunction with the weight of the tiny house as a whole, and a safety zone and materials placed around it.

5. Install the desired flooring. For example, you could use hardwood in the living area and light tiles in the kitchen and bathroom areas. Splashbacks can also be used.

6. Install drywall and/or wall panels.

7. Construct the cabinets and counter tops for the kitchen. It is great if you can use recycled wood for these purposes. Include hookups and openings for the oven, fridge, and sink, etc.

8. Construct and install the bathroom vanity and storage. Install vents and the toilet.

9. Build in the storage units as per the initial design. You may also realize other possible storage options, so remain flexible and open to relevant changes.

10. Put in bulbs and outlet covers.

11. Decorate as desired. Your tiny house is complete. Now you can move in and enjoy your own space.



Question : How do I add a bathroom?

Answer : You need to decide whether you want it to be a whole little room of its own or just a cupboard-style loo with tiny shower. Keep it at one end of the tiny house and make sure it's well ventilated. Keep in mind weight if you're adding a bathtub.



Tips.

While planning make notes of the materials you will use in there largest quantities as most stores will give you better deals when you buy in bulk. However it is necessary to know exact quantities as to not over buy, then your just wasting your money.

Keep in mind the Material while building, so most building materials come in increments of 4 to 8 feet, so build the house around those dimensions to keep it easier.

Warnings.

- Loans are hard to get when there is no much that you have to put up for collateral, it is almost impossible for someone just starting out to get a loan on a none.

Laws - building codes are generally made for regular houses, and city building codes usually frown on most of the common practices the tiny homes follow.

Land - It is hard to find a piece of land to set your tiny house up on, in-city is almost impossible, and outside in a rural area will not have proper hookups.

When putting up the walls, it is important to have help, as this is very dangerous for one person to do alone.

11:39 AM

How to Customize the Interior of Your Van.

How to Customize the Interior of Your Van.

Painting, insulation, and furniture can turn a standard utility van into a second home. New designs can also bring outdated conversion vans into the twentieth century. Converted vans offer better fuel mileage and easier highway driving than old-fashioned camper-trailers, and with the DIY know-how you can truly make them your own.



Method 1 Painting Inside Your Van.

1. Prepare your van for painting. Before you paint, be sure to remove or cover up anything that you don’t want to get paint on. Remove all fixtures including floor mats, furniture, and any removable shelving. Items that can’t be removed—such as carpeting and door handles—should be taped over or covered in newspaper so that you don’t accidentally paint them too.

Completely clean the surface you are going to paint. Remove all layers of dust, rust or grime that may have accumulated before you paint. Failing to do so will cause visible imperfections in your final paint job.

2. Use anti-rust paint on metal walls. Always paint in a well ventilated area with lots of light. When customizing a standard utility van with metal walls, you will need two layers of paint:

Anti-rust paint. Anti-rust paint is available in spray-on or liquid form. The liquid form comes in two parts that must be mixed and applied with a brush. Ask an employee of your local home improvement store which is best for you.

Spray-on metal paint in the colour of your choice.

3. Cover old vinyl wallpaper if you can't take it down. Older conversion vans from the 1970s often came with vinyl wallpaper interiors that are as difficult to remove as they are ugly to look at. If you don’t feel up to taking it off entirely, you can paint over it.

Begin with an oil based primer. Water-based primers will loosen the paper from the wall, potentially causing it to sag or bubble.

After the primer dries, apply another coat if it doesn’t completely cover the whole surface.

When the primer has dried, paint in the colour of your choice. You may use water based paint for your final coat as long as the primer covers everything underneath it.

4. Repaint your cupboards to add colour. If your van already has a kitchen/storage inside, you can spruce it up by repainting all those surfaces. Before you paint:

Remove all cupboard doors and drawers. You will see the best results if you paint these parts individually. Make sure you label them so you know where to put them back when you’re done.

Remove hinges and handles. This will keep you from getting paint on your hardware accidentally. If you are considering painting the hardware along with the wood—don’t—the paint will quickly chip off.

Sand wood surfaces and wipe off the dust before painting.



Method 2 Insulating Your Van.

1. Start with a layer of radiant insulation. Radiant insulation is reflective—that is, heat bounces off it—so that thermal heat you generate inside stays locked in, while outside the sun’s rays bounce off. This will keep your van warm in the winter and cool in the summer.

Cut the insulation to fit your wall and ceiling.

Spray a heavy-duty adhesive to the wall and to the back of your insulation.

Firmly press insulation to the wall/ceiling and hold it until it dries.

2. Cover the windows with rigid foam paneling. Many utility vans have “pop-out” windows which swing out rather than roll down. Covering them is a good way to insulate your vehicle—if you don’t mind the aesthetic.

Cut the foam paneling slightly larger than the space it is meant to fill.

Squeeze the panel into the window frame. It should compress around the edges for a snug fit.

Secure it along the edges with installation tape.

3. Cover the bottom half of your walls in fibreglass insulation. If your van has no windows, you can use this insulation to cover the walls from top to bottom.

Wearing gloves, cut pieces of fibreglass insulation to fit your wall.

Stuff the fibreglass into green garbage bags, and seal them with installation tape. This keeps moisture out of your insulation and prevents mold.

Attach the garbage bags to the walls with installation tape around the perimeter.

4. Spray foam in cracks and crevices. Spray-able foam will fill up corners that other types of insulation can’t fit into, and can be bought in a standard “gap and crack filler” variety. Be sure to follow the manufacturer's instructions.

Do not spray foam in cold weather. Cold prevents the foam from setting properly, and you may find it oozing out of the cracks when it gets warm.

Foam expands when you spray it and can be unpredictable. If you are filling an especially large gap, only fill it 1/3rd of the way at first. Wait until it dries, then spray the next third, and so on. This will prevent it from expanding too much and pushing out on its surroundings.

After its dried, use a utility knife to cut away excess foam.



Method 3 Upholstering Your Interior.

1. Attach studs to the walls of your van before you insulate. If you are converting a utility van with metal walls, you will need to glue studs to those walls so you have something to mount new paneling on.

Cut 2 inches (5.1 cm) x 2 inches (5.1 cm) wood studs the height of your wall.

Glue the studs to wall of your van just inside of where your upholstered paneling will go.

Screw the paneling into the studs, after it has been upholstered. Cover the screws with screwcaps.

2. Make a template of the area you wish to upholster. This template will function as a pattern when it comes time to cut out the plywood that you will attach your upholstery to, so it is important to cut and measure very carefully. To make a template:

Tape a large sheet of paper to the wall or floor.

Cut out the shape of the area you wish to cover.

3. Cut plywood according to the template. Be very careful when using a saw--you may wish to wear goggles to protect your eyes from sawdust. Be sure to double check your measurements, or you may have to repeat this step.

Tape your template to a sheet of plywood.

Using a saw, cut the plywood into the shape of the template.

Be sure to use thin plywood that can bend to the curvature of your walls.

4. Cover the plywood with bunting. A layer of felt bunting acts as a buffer between the hard plywood and soft upholstery. Bunting can be bought at any home improvement or furniture repair store.

Roll out the bunting overtop the plywood.

Cut the bunting so that it is exactly the size and shape of the wood it is going to cover.

Glue the bunting and wood together with upholstery adhesive.

5. Cut out upholstery. Use the plywood as a pattern, and cut your upholstery just larger than each piece of wood.

Leaving at least 3 inches of fabric around the sides will allow you to stretch the upholstery and glue it to the back of the plywood.

6. Glue the upholstery to the plywood. Lay the upholstery down, with the paneling on top of it. The “front” of the upholstery should be facing down. The blank side of the plywood should be facing up. Spray the exposed edges of the fabric, and the perimeter of the plywood with upholstery glue.

Pull the fabric taught, and fold it over the edge of the plywood. Press down with a drywall knife to ensure the glue dries flat.



Method 4 Furnishing Your Van.

1. Put pneumatic struts under your bed. If you want to be able to sleep while the van is in motion, mount your bed on 100 pounds (45 kg) pneumatic struts. These mechanisms absorb the bumps and vibrations of driving, so that it feels like you’re sleeping on water and not on the road.

These struts can be found most easily online, but it is safer to order them from a home improvement store, the better to know what you’re getting.

2. Alter a standard futon if you can’t afford a custom built one. Most mattresses are too big to fit in a van. If you can’t afford a custom built one, you can alter a standard futon mattress to fit:

Open the cover of your futon mattress and pull back the cushioning until you reach the springs.

Using heavy duty wire clippers, clip the springs to the desired length.

Replace the cushioning and sew the cover closed.

3. Reupholster your seats. If the seats in your van are looking a bit worn, you can recover them to suit the van’s new look. This is a tough job, best left to a professional.

4. Choose furniture that provides storage. A van can get cramped, especially one that doubles as a second home. Fortunately, you can buy and build furniture with built in storage potential. Some examples include:

Building a garbage can that doubles as a stool.

Installing drawers under your bed.



Tips.

Different paints have different brush, storage, and dry-time needs. Check with an employee of your local home improvement store to make sure you're buying the right kind.

It is a good idea to wear gloves while doing any hands on work. These gloves may protect you from splinters, and keep your hands free of paint that can be difficult to wash off.

Warning.

Heavy duty adhesives and oil based paints can be toxic. It is important to use these materials in well ventilated areas. Cover your face if possible.

11:12 AM

How to Use Mirrors to Create More Space.

How to Use Mirrors to Create More Space.

Using mirrors to create the feeling of more space is a common trick of interior designing. If you have small rooms in your home, strategically placed mirrors can help. You can use movable mirrors by placing them near windows or furniture. You can also install mirrors inside cabinets or behind counters.


Method 1 Using Movable Mirrors.

1. Place a mirror along the wall in a narrow kitchen. If you have a narrow kitchen, it can easily feel cramped and uncomfortable. A longer mirror strategically placed along one wall can make a small kitchen feel bigger. Place a mirror running horizontally along one wall of your kitchen, keeping it above cabinets and other furniture so it's visible.

You can buy a long mirror at a department store. Hang it alongside one wall in your kitchen. You will be surprised at how much bigger it looks.

A single mirror in the kitchen is usually suitable to make your space look bigger. More than one mirror may overwhelm in the kitchen.

2. Fake a window using a mirror. Windows can often make a small room feel larger. If you have a room with only one window, you can use a mirror to create the illusion of a window in your living space.

Place a mirror directly across from one window in your home.

The mirror will reflect images of outdoors, doubling the natural light in the room. It will also make the window-less wall look less closed off.

3. Add a mirror above your bed. If you have a small bedroom that's bothering you, try hanging a large mirror over your bed. Place a bigger mirror just above your headboard. If you don't have a headboard, you can simply keep the mirror a few feet up from the end of your mattress.

A mirror over your bed creates a sense of depth. This can make a small bedroom feel bigger.

Keep the mirror on the wall of your bedroom and not the ceiling.

4. Use floor length mirrors behind furniture. In a small space, furniture may feel cramped or cluttered. This issue can easily be corrected by placing large mirrors just behind big pieces of furniture.

Choose floor-length mirrors the same width as your furniture. Place the mirrors just behind the furniture so the top sticks out.

5. Place a mirror near or in an art display. Densely packed collections of paintings and objects can look cramped. Try inserting small mirrors in areas where you display artwork.

If you display artwork on a shelf, use one of the drawers in the shelf to display a mirror. You can also place a standing mirror behind a piece of artwork on a mantel.

If you have paintings or other artwork hung up on a wall, hang a mirror next to the paintings as well.


Method 2 Installing Mirrors.

1. Install mirror doors on your closet. A small closet can make you feel claustrophobic. Have mirror doors installed on your closet, as this can create the illusion of extra space.

Closet doors can also create extra room in your home because you do not need to take up space with floor mirrors.

If you don't have the time or money for a full installation, you can purchase a hanging mirror at a department store and hang it over the door.

2. Use a mirror backsplash. A kitchen backsplash can be made into a mirror to make a small kitchen look larger. If you're renovating, consider a reflective back splash to make the most of your space.

In addition to creating the illusion of more space, mirror back splashes are fairly easy to clean.

3. Add mirrors to cabinet drawers. If you have a tiny kitchen or bathroom, have mirrors installed on the doors of cabinets. This can be done by simply gluing mirrored tiles or small mirrors to the front of your cabinets. This will make your kitchen feel slightly more open.

4. Make use of mirrored tiles. Mirror tiles can be purchased at most home improvement stores. You can create a mirror wall in one room by glueing or nailing mirror tiles to the wall. You can also use them in spaces that feel cramped. For example, in a small bathroom try putting up mirrored tiles adjacent to the shower.


Method 3 Maximizing Impact without Overdoing It.

1. Be strategic about where you place mirrors. Do not simply hang up your mirrors everywhere in your home. Always take into account what the mirror is reflecting before hanging it up. You want to use mirrors to maximize light sources and emphasize space.

Mirrors should reflect a light source in order to brighten a room by creating more light. A mirror facing a blank wall will not do much to brighten your space. Instead, place a mirror across from a window or a well-lit area in your home.

You should also avoid placing mirrors in areas where they will reflect things like furniture and clutter. You do not want a mirror to make a room look more cluttered. Instead of having a mirror facing a somewhat messy desk, have it reflect a sleek mantel that only holds a few decorative items.

2. Do not go overboard with mirrors in the kitchen. One strategically placed mirror in the kitchen is enough to make the room more open. Too many mirrors can be overwhelming and even look tacky. Mirrors are not usually necessary in the kitchen, so more than one mirror may look odd to visitors.

For example, if you opt for a horizontal mirror running down one wall, do not put a mirror on the opposite wall. The effect will be overwhelming.

3. Avoid ceiling mirrors. Ceiling mirrors are no longer in fashion. They were popular in the '70's, but many decorators find them tacky. Also, mirrors on the ceiling will not do much to create the illusion of space. Stick to hanging mirrors on the wall.

Mirrors can be great in your bedroom if you want to create more space there, as well as more light. A full-length mirror near your closet can work great if it, say, reflects a window or a lamp.


Question : How can I place a mirror to reflect light from a skylight?

Answer : Place it on the wall the sun hits the most.


Tips.

Use a mirror as a coffee table surface. This will reflect light upwards and will reflect elements of the room towards the eye when looking downwards.

11:54 AM

How to Organize a Small Apartment

How to Organize a Small Apartment.

Whether someone is seeking a more minimalist lifestyle or a small space is all that's in their price range, it's very common for people to live in small apartments. You might be wondering how you could possible fit all your belongings into such a small space. Luckily, with some smart creative organizing, you can maximize the space available in your living area, closets, bedroom, and kitchen.



Part 1 Avoiding Clutter in Your Living Area.

1. Attach hooks to the wall in your entryway. Jackets, purses, and bags can take up a lot of space if they’re thrown around. By installing hooks just inside the front door, you’ll have a designated spot for these items. That way you and your guests can leave your jackets and bags here, freeing up space in the rest of the room.

You could also use a standing coat rack for the same purpose. That way, you won’t have to worry about drilling holes in your wall.

There are also sticky hooks you could use that attach to the wall without the need for screws or nails.

2. Hang shoe organizers inside your closets to free up space. You might not realize that the inside of your closet doors have tons of space for storage. Hanging shoe organizers give you storage pockets for all your footwear that might otherwise clutter your floor or closet space.

Mount these organizers inside all your closets to get even more storage space.

Remember, shoe organizers don’t have to only hold shoes. They’re great for storing all kinds of things that might be cluttering your home!

3. Place space-saving corner shelves throughout your apartment. Maximize your storage room by using all of the corner space available in your apartment. Installing these shelves will give you more room for storage, or for displaying decorations to give your apartment some character.

You can either use shelves mounted to the wall, or get a few corner shelf stands.

4. Use floor-to-ceiling bookcases to take advantage of vertical storage. In a small apartment, all your storage must be done vertically. Tall bookcases are a great investment because they take advantage of this and let you store items from your floor all the way up to your ceiling.

Remember, bookcases aren’t just for books. They can store electronics, video games, file folders, or just about anything else that might otherwise end up in a drawer.

5. Find a pop-up coffee table to maximize your space. This type of coffee table opens up to reveal storage space inside. Some types also extend, allowing multiple people to use a seemingly small table.

You can also find a coffee table with drawers. This will still conceal storage space in a functional piece of furniture.

6. Get rid of things you don’t need to prevent clutter. One of the keys to living in a small apartment is minimizing the amount of things you have to store. You might organize your apartment perfectly but still not have enough room. In this case, it’s time to take a look at what you own and decide what you can live without.

Remember to donate things that are still in good condition. Homeless shelters, veterans’ organizations, and other charities would love to have your old clothes and other items.



Part 2 Making Space in Your Bedroom.

1. Get a bed with storage space. Some beds come with built-in storage space. This is a huge space saver in a small bedroom. If your bed has enough storage, you could avoid the need for a dresser or cabinet and increase your available floor space.

Some bed designs have built-in drawers. You could use these as a replacement for a dresser.

You could also invest in an Ottoman bed. With this design, the mattress lifts up to reveal storage space underneath. This space is perfect for clothes and linens.

If a bed with storage is out of your price range, you could also get a raised bed and use the space underneath to slide boxes.

2. Consider a Murphy bed if you live in a studio apartment. Your bed could take up a lot of space in a studio apartment. Murphy beds are designed to fold up into a compartment that looks like an ordinary cabinet. This frees up the space the bed was using saves a lot of room in a studio apartment.

Remember that Murphy beds can be expensive. Even cheaper models can be around $1,000. Consider your budget before making this investment.

3. Mount shelves above your bed for additional storage and décor. There is plenty of space above your bed for one or more shelves, avoiding the need for night tables that take up room.

Remember to test the height of any shelves you install above your bed. You should be able to sit up comfortably in bed without hitting your head, so make a mark on the wall where your head reaches up to.

Make sure any shelves above your bed are installed properly and the items you place on them are secure. You don’t want anything falling on your while you sleep!

4. Add a door hanger to your closet to free up closet space. You can maximize your closet space by installing a hanger rack on the inside of your closet door. This instantly doubles your space by allowing you to hang clothes on the normal closet rack and the door rack.

There are several models of door hangers available. The simplest just hook over the top of the closet door, making installation and removal easy.

5. Hang a full-length mirror on your door. A flat mirror can easily hook to the top of your bedroom door. This takes up very little space, and will make getting dressed a lot easier.

The added bonus here is that mirrors help rooms look bigger. If you're feeling cramped in your tiny bedroom, this addition could do the trick.

Hanging mirrors throughout your apartment could also make the rest of the space look bigger.

6. Get a laundry hamper and keep your dirty laundry in it. In a small bedroom, dirty laundry will accumulate fast. Designate a space for your dirty clothes with a hamper in your bedroom. This will prevent you from leaving clothes on your floor.

Also remember to do your laundry often! Your hamper will fill up quickly and you don't want the clutter to overflow.

Put your clean laundry away quickly too. Don't let a laundry basket take up your space.



Part 3 Maximizing Space in Your Kitchen.

1. Install wall hangers for your pots and pans. These take up a lot of space and you'll probably need your drawers and cabinets for storing utensils and cooking supplies. Take advantage of your kitchen's wall space by storing pots and pans vertically instead.

You could use screws to hang these hooks, or if you’d rather not drill holes in your wall, there are hooks that use sticky backs to attach to the wall.

The added bonus here is that your pots and pans will be easily-accessible, and you won't have to dig for them in a cabinet.

2. Mount spice racks to the wall to save space. You’ll probably run out of drawer space quickly in a small kitchen. Spice racks on the wall will give you room to store all your ingredients and keep your drawers free for utensils.

You probably have room for several spice racks, so feel free to install more than one for even more storage.

You can also use spice racks to store other things like napkins, cups, or salt shakers.

3. Use stackable shelves in your cabinets to stay organized. Cabinet space is precious in a small kitchen, so you have to make the most of what you have. By installing shelves in your cabinet, you can add two or even three rows of storage space that you didn't have before.

When stacking items, remember to organize them by weight. Heavy items like a crock pot should be on the bottom, and lighter items should be on the top.

4. Attach a folding table to your wall. If your kitchen or living area is too small for a table, there are models that hook to your wall and fold up. Like a Murphy bed, these tables free up space when not in use.

Some folding table models also include even more storage space inside the cabinet that houses the table. You can use this to store away any glassware or silverware that you might not know what to do with.

To further save space, consider pairing stackable chairs or stools with this table. Like the table, these can store away when not in use.

5. Store items above your refrigerator. There is more room up there than you think! The unused space above your refrigerator can add some more storage or decoration to your kitchen. For example, you could install shelves there and store cups, dishes, or even cookbooks.

A wine rack could also be a nice addition above your fridge.

6. Utilize the space above your cabinets for storage. Rather than collecting dust, this area can maximize the storage in your kitchen.

Extra pots and pans could fit nicely in this space. This would be convenient while you cook.

If there is enough space, you might even be able to install more shelves up here. This can store more silverware, or you can use it as an overflow area for some of the things in the rest of your apartment.

It's tempting to view these spaces as a junk area where you just throw things you don't need. Avoid that temptation! Keep these areas was well-organized as all your other spaces.

11:48 AM